Wolverine Tube - Turbo-CEP

· Alloys Available and
Applicable Standards

UNS C12200 (DHP Copper) to ASME SB75 and ASME SB359

· Product Formats

Straight Lengths to 20 feet, + 1/8 inch maximum variation

Straight Lengths over 20 feet, + 5/32 inch maximum variation

Ends are supplied either brush deburred or chamfered

· Packaging

Packaging options include wooden boxes and shipping frames.

· Tempers Available

As fabricated temper

· Testing

All tubes are NDET tested per the requirements of WPS 9008 and pressure tested per the requirements of WPS 9009.

ID/OD Enhanced Surface for Improved Heat Transfer

Turbo-CEP is designed for light hydrocarbon condensing. The integral helical fins on the outside of the tube are modified to enhance the condensing heat transfer coefficient. The inside heat transfer coefficient is improved because of increased surface area and turbulation induced by integral helical ridges on the inside surface. The availability of plain ends and intermediate lands makes Turbo-CEP especially suitable for shell and tube condensers.

The increased ID ridge count improves the overall heat transfer efficiency of Turbo-CEP over Turbo-C, while slightly increasing the ID pressure drop. Furthermore, Turbo-CEP has higher water-side performance than Turbo-CDI due to a different inside geometry.

Where There is a need for low ID pressure drop, several sizes are available in Turbo-CEP. It may also be supplied with a smooth bore.

Turbo-CEP - UNS C12200
Standard Sizes			Plain End Dimensions		Finned Section Dimensions
Catalog Number	Outside Diameter inch (mm)	Nominal Wall inch (mm)	Outside Diameter inch (mm)	Wall inch (mm)	Fin Per Inch	Finished Fin OD inch (mm)	Min. Wall Under Fins inch (mm)	Root Diameter inch (mm)
31-4050025	3/4 (19.05)	0.025 (0.635)	0.743 (18.87)	0.049 (1.23)	40	0.743 (18.87)	0.025 (0.635)	0.668 (16.97)
31-4053228	3/4 (19.05)	0.028 (0.711)	0.743 (18.87)	0.049 (1.23)	40	0.743 (18.87)	0.025 (0.635)	0.668 (16.97)

Turbo-CEP - UNS C12200
Standard Sizes		Inside Dimensions		Areas
Catalog Number	Weight Per Unit Length lb/ft (kg/m)	Nominal Inside Diameter inch (mm)	Nominal Ridge Height inch (mm)	Nominal Inside Surface Area ft²/ft (m²/m)	Actual Inside Surface Area ft²/ft (m²/m)	Nominal Outside Surface Area ft²/ft (m²/m)	Actual Outside Surface Area ft²/ft (m²/m)
31-4053228	0.360 (0.536)	0.612 (15.54)	0.019 (0.483)	0.160 (0.049)	0.264 (0.080)	0.196 (0.060)	0.711 (0.217)
31-4053228	0.360 (0.536)	0.612 (15.54)	0.019 (0.483)	0.160 (0.049)	0.264 (0.080)	0.196 (0.060)	0.711 (0.217)